This product can apply insulation coating to overhead bare conductors. It is
specially designed for complex terrains and scenarios where operation vehicles
cannot access or personnel cannot reach heights. It is compatible with conductor
specifications LGJ70-LGJ240,featuring multi-terrain adaptability, high speed,
large capacity, and high operational efficiency. After being coated by the robot, the
bare conductor becomes an insulated one.
The robot autonomously mounts the line via an insulating rod,Without requiring
operators to directly contact live conductors.
| Voltage Level | Net Weight | Loading Capacity | Mounting Height | Climbing Capacity | Maximum Walking Speed |
|---|---|---|---|---|---|
| 10 kV、35 kV | 27 kg | ≤10 L | ≤18 m | ≤40° | 18 m/min |
This product can apply insulation coating to overhead bare conductors. It is
specially designed for small wire diameter specifications LGJ25-LGJ120 and
operation scenarios where the terrain is complex and the operating vehicle cannot
reach or the personnel cannot climb high. Through the insulating rod, the operator
does not need to directly touch the live conductors, featuring compact size, light
weight, and portability. After being coated by the robot, the bare conductor becomes
an insulated one.
The robot climbs onto the power line with the assistance of an insulating
pole.Without requiring operators to directly contact live conductors.
| Voltage Level | Net Weight | Loading Capacity | Mounting Height | Climbing Capacity | Maximum Walking Speed |
|---|---|---|---|---|---|
| 10 kV、35 kV | 21 kg | ≤5 L | ≤15 m | ≤35° | 5 m/min |
This product can apply insulation coating to overhead bare conductors. It is
specially designed for live-line work on 110 kV overhead transmission lines and
working scenarios where the line height is too great to adopt conventional line
mounting solutions. Mounted via a carrier drone, it features multi-terrain adaptability,
breaking through height limits,light weight, high speed, emergency rescue
capability, self-unlocking nozzle, and remote wire measurement. After coating by the
robot, the bare conductor becomes insulated.
Mounted and lifted via a carrier drone.
| Voltage Level | Net Weight | Loading Capacity | Mounting Height | Climbing Capacity | Maximum Walking Speed |
|---|---|---|---|---|---|
| 66 kV、110 kV | 20 kg | ≤10 L | ≤150 m | ≤35° | 12 m/min |
This product can carry out anti-icing coating treatment on the line. Mounted via a
carrier drone, it features multi-terrain adaptability, breaking through height limits,
light weight, high speed, emergency rescue capability, self-unlocking nozzle, and
remote wire measurement. After anti-icing coating by the robot, the line surface
becomes hydrophobic and oleophobic, which can reduce ice accumulation, delay
icing, and decrease the adhesion of rain and ice to the line, facilitating easy shedding
of rain and ice and mitigating the impact of severe icing weather on the line.
Mounted and lifted via a carrier drone.
| Voltage Level | Net Weight | Loading Capacity | Mounting Height | Climbing Capacity | Maximum Walking Speed |
|---|---|---|---|---|---|
| ≤800 kV(ground wire)、≤220 kV(conductor) | 18 kg | ≤5 L | ≤150 m | ≤35° | 15 m/min |
This product is an insulating coating specially designed for live-line insulation
spraying on exposed points and pollution flashover areas of power equipment
(pole-mounted equipment, leads, clamps, transformers, etc.). After spraying, the
coating is closely combined with the substrate to form an insulation protection layer,
which provides insulation, weather aging resistance, waterproofing, rust prevention,
and anti-corrosion protection, and effectively reduces the risk of accidents such as
short circuits, tripping, discharge, and pollution flashover caused by foreign object
bridging at exposed points.
Spraying via insulating rod or aerial spraying via drone.
| Applicable Voltage | Dielectric Strength | Solid Content | Color | Specification |
|---|---|---|---|---|
| 10 kV | ≥30 kV/mm | >50% | White or custom-made | 5 kg or customized |
This product is an insulation coating material specially designed for the insulation
protection of overhead bare wires. Applicable for voltage levels of 10 kV, 35 kV, 66 kV,
and 110 kV. In conjunction with insulation coating robots, it enables rapid
long-distance insulation coating of conductors in outdoor and aerial environments,
and achieves full-span or partial insulation of overhead lines.Compared with the
replacement of insulated wires, relocation of lines, and replacement of towers, the
insulation coating solution is simple, fast, safe, with short cycle time and low cost.
Coating assisted by insulation coating robots.
| Model Number | Applicable Voltage | Density | Specification |
|---|---|---|---|
| 627W、635、6110 | 10 kV、35 kV、66 kV、110 kV | <1 g/cm³、<1.40 g/cm³、<1.35 g/cm³ | 5 kg or customized |