X50 Gen 5 Auto-climbing Insulation Coating Robot

Product Description

This product can apply insulation coating to overhead bare conductors. It is

specially designed for complex terrains and scenarios where operation vehicles

cannot access or personnel cannot reach heights. It is compatible with conductor

specifications LGJ70-LGJ240,featuring multi-terrain adaptability, high speed,

large capacity, and high operational efficiency. After being coated by the robot, the

bare conductor becomes an insulated one.

Application Methods

The robot autonomously mounts the line via an insulating rod,Without requiring

operators to directly contact live conductors.

Voltage Level Net Weight Loading Capacity Mounting Height Climbing Capacity Maximum Walking Speed
10 kV、35 kV 27 kg ≤10 L ≤18 m ≤40° 18 m/min

M20 Gen 2 Small-sized Auto-climbing Insulation Coating Robot

Product Description

This product can apply insulation coating to overhead bare conductors. It is

specially designed for small wire diameter specifications LGJ25-LGJ120 and

operation scenarios where the terrain is complex and the operating vehicle cannot

reach or the personnel cannot climb high. Through the insulating rod, the operator

does not need to directly touch the live conductors, featuring compact size, light

weight, and portability. After being coated by the robot, the bare conductor becomes

an insulated one.

Application Methods

The robot climbs onto the power line with the assistance of an insulating

pole.Without requiring operators to directly contact live conductors.

Voltage Level Net Weight Loading Capacity Mounting Height Climbing Capacity Maximum Walking Speed
10 kV、35 kV 21 kg ≤5 L ≤15 m ≤35° 5 m/min

F110 Gen 2 110kV Insulation Coating Robot

Product Description

This product can apply insulation coating to overhead bare conductors. It is

specially designed for live-line work on 110 kV overhead transmission lines and

working scenarios where the line height is too great to adopt conventional line

mounting solutions. Mounted via a carrier drone, it features multi-terrain adaptability,

breaking through height limits,light weight, high speed, emergency rescue

capability, self-unlocking nozzle, and remote wire measurement. After coating by the

robot, the bare conductor becomes insulated.

Application Methods

Mounted and lifted via a carrier drone.

Voltage Level Net Weight Loading Capacity Mounting Height Climbing Capacity Maximum Walking Speed
66 kV、110 kV 20 kg ≤10 L ≤150 m ≤35° 12 m/min

A100 Anti-Icing Coating Robot

Product Description

This product can carry out anti-icing coating treatment on the line. Mounted via a

carrier drone, it features multi-terrain adaptability, breaking through height limits,

light weight, high speed, emergency rescue capability, self-unlocking nozzle, and

remote wire measurement. After anti-icing coating by the robot, the line surface

becomes hydrophobic and oleophobic, which can reduce ice accumulation, delay

icing, and decrease the adhesion of rain and ice to the line, facilitating easy shedding

of rain and ice and mitigating the impact of severe icing weather on the line.

Application Methods

Mounted and lifted via a carrier drone.

Voltage Level Net Weight Loading Capacity Mounting Height Climbing Capacity Maximum Walking Speed
≤800 kV(ground wire)、≤220 kV(conductor) 18 kg ≤5 L ≤150 m ≤35° 15 m/min

Nano-ceramicized Insulating Coating

Product Description

This product is an insulating coating specially designed for live-line insulation

spraying on exposed points and pollution flashover areas of power equipment

(pole-mounted equipment, leads, clamps, transformers, etc.). After spraying, the

coating is closely combined with the substrate to form an insulation protection layer,

which provides insulation, weather aging resistance, waterproofing, rust prevention,

and anti-corrosion protection, and effectively reduces the risk of accidents such as

short circuits, tripping, discharge, and pollution flashover caused by foreign object

bridging at exposed points.

Application Methods

Spraying via insulating rod or aerial spraying via drone.

Applicable Voltage Dielectric Strength Solid Content Color Specification
10 kV ≥30 kV/mm >50% White or custom-made 5 kg or customized

Self-curing Smart Insulation Coating Material

Product Description

This product is an insulation coating material specially designed for the insulation

protection of overhead bare wires. Applicable for voltage levels of 10 kV, 35 kV, 66 kV,

and 110 kV. In conjunction with insulation coating robots, it enables rapid

long-distance insulation coating of conductors in outdoor and aerial environments,

and achieves full-span or partial insulation of overhead lines.Compared with the

replacement of insulated wires, relocation of lines, and replacement of towers, the

insulation coating solution is simple, fast, safe, with short cycle time and low cost.

Application Methods

Coating assisted by insulation coating robots.

Model Number Applicable Voltage Density Specification
627W、635、6110 10 kV、35 kV、66 kV、110 kV <1 g/cm³、<1.40 g/cm³、<1.35 g/cm³ 5 kg or customized